Solar Kit 5kWh + 6.2kW
1 / 2
Solar Kits
Solar Kit 5kWh + 6.2kW
A 5 kWh solar storage kit paired with a 6.2 kW inverter, 6 × 620 W PV modules and installation accessories.
Energy5 kWh
Power6.2 kW
Some electrical parameters are under technical review. Contact our team for the current specification.
Request a QuoteKNOW YOUR SYSTEM
Product overview
The kit brings battery storage, power conversion and solar generation into one component schedule, helping installers plan the system around the site's loads and available mounting area.
The supplied configuration includes roof mounting, PV cable and MC4 connectors. Review the component quantities below with your installer before confirming the final installation.
- Mounting arrangement: Roof mounting
- PV modules: 6
Technical specifications
Model-specific data from the supplied product records and specification sheets. Values marked for confirmation are not included in the headline ratings.
Product & applicationBattery & energyPV inputMechanical & environmentBattery componentInverter componentPV module component
| Parameter | Specification |
|---|---|
| Inverter power (kW) | 6.2 |
| System type | Hybrid |
| Inverter quantity (pcs) | 1 |
| MC4 connectors | Included |
| DC circuit breaker (pcs) | Not specified |
| Parameter | Specification |
|---|---|
| Battery energy (kWh) | 5 |
| Battery quantity (pcs) | 1 |
| Parameter | Specification |
|---|---|
| PV module (W) | 620 |
| PV modules | 6 |
| PV cable | Included; length to suit configuration |
| PV combiner box (pcs) | 1 |
| Parameter | Specification |
|---|---|
| Mounting arrangement | Roof mounting |
| Parameter | Specification |
|---|---|
| Usable energy | 5.12 kWh |
| Nominal voltage | Pending confirmationSupplied documents contain conflicting values. |
| Nominal capacity | Pending confirmationSupplied documents contain conflicting values. |
| Operating voltage range | 44.84– 58.4V |
| Cell technology | LiFePO4 (LFP) |
| Max charge current (battery-side cap) | Pending confirmationSupplied documents contain conflicting values. |
| Max discharge current | Pending confirmationSupplied documents contain conflicting values. |
| Charge temperature | 0 – 45 °C |
| Discharge temperature | -20 – 60 °C |
| Humidity | ≤ 95 % RH (no condensation) |
| IP rating | IP20 (indoor) |
| Dimensions (W×H×D) | Refer to factory datasheet |
| Cycle life | 6,000 cycles @ 80 % DoD |
| Scalability | Multiple units in parallel |
| Communication | CAN / RS485 |
| Display | SOC LED indicator + LCD display |
| Compatible inverters | 48 V system inverters (Haishang, Victron, etc.) |
| Compliance | UN38.3 / IEC 62619 / IEC 61000Standards listed in the component sheet; model-specific certificates are not established by this table. |
| Application | Off-grid / Backup / On-grid (with hybrid inverter) |
| Warranty | 5 years (standard) |
| Parameter | Specification |
|---|---|
| AC rated output power | 6200 W |
| Nominal AC voltage | 240 VAC ± 5 % (single phase) |
| Nominal AC frequency | 50 / 60 Hz |
| Nominal AC output current | 28.2 A |
| Output waveform | Pure sine wave |
| Phase | 1 |
| Battery rated voltage | 48 V (51.2 V LFP compatible) |
| Battery type | Lead-acid / Lithium |
| Battery charge / discharge current | 120 A |
| Charging method | Two-way / three-way / automatic setting |
| Maximum PV input power | 8500 W |
| MPPT voltage range | 60 – 450 V |
| Max PV open-circuit voltage | 500 V |
| Max PV DC input current | 27 A |
| MPPT trackers | 1 |
| Cooling | Intelligent air cooling |
| Operating temperature | -10 – 60 °C |
| IP rating | IP21 (indoor) |
| Dimensions (W×H×D) | 420 × 315 × 120 mm |
| Net / gross weight | 9.7 kg / 11.2 kg |
| Packaging size | 495 × 405 × 220 mm |
| Working mode | Hyrbid |
| Output Topology | L+N+PE |
| Parameter | Specification |
|---|---|
| Maximum power (Pmax) | 620 W |
| Module efficiency | 22.95 % |
| Voltage at Pmax (Vmpp) | 41.33 V |
| Current at Pmax (Impp) | 15.00 A |
| Open-circuit voltage (Voc) | 49.32 V |
| Short-circuit current (Isc) | 15.92 A |
| Power tolerance | 0 / +5 W |
| NMOT maximum power (Pmax) | 466.0 W |
| NMOT Vmpp / Voc | 38.83 V / 46.33 V |
| NMOT Impp / Isc | 12.00 A / 12.74 A |
| Nominal operating temperature | 45 ± 2 °C |
| +5 % rear gain / Pmax | 23.32 % / 651 W |
| +15 % rear gain / Pmax | 26.40 % / 713 W |
| +25 % rear gain / Pmax | 28.69 % / 775 W |
| Cell technology | N-type Mono (LECO / SMBB) · 132 cells (6 × 22) |
| Dimensions (L × W × H) | 2382 × 1134 × 30 mm |
| Weight | 33.5 kg |
| Front / rear static load | 5400 Pa / 2400 Pa |
| Junction box | IP68 · 3 bypass diodes · MC4 compatible |
| Max system voltage | 1500 V DC (IEC) |
| Max series fuse rating | 30 A |
| Operating temperature range | -40 °C to +85 °C |
| Temp. coeff. Pmax / Voc / Isc | -0.29 % / -0.25 % / +0.045 % per °C |
| Product warranty | 15 years |
| Linear power warranty | 30 years · 87.4 % at year-30 |
| Certifications | ISO 9001 / 14001 / 45001, IEC 61215, 61730, 61701, 62716, CEStandards listed in the component sheet; model-specific certificates are not established by this table. |
Source documents
- Combo_Set_Overview.md · product and packing record
- Hybrid_5kWh_6.2kW_System_SpecSheet.pdf · Page 2
Around your solar kit
Protection, mounting and connection accessories for this kit family. Final component variants, quantities and mounting arrangements are confirmed with your configuration.
Build your system
Let’s talk about your project.
Tell us what you are building. We will help you find the information and product options you need.